Blog

Rady a návody z dielne

Ako vybrať termolis či ploter, čím čistiť v ultrazvukovej čističke, na čo si dať pozor pri CNC a laserovej gravírke, ako zapojiť prístupový systém – prakticky a bez reklamných rečí.

Airless spraying: first steps and nozzle selection
2026.11.15 09:00 Airless spraying: first steps and nozzle selection What can be sprayed with an airless machine, how to read the nozzle number, how to adjust the pressure and what to pay attention to during safety and cleaning. Čítať článok →
Electric sauna stove: how to choose power
2026.11.15 09:00 Electric sauna stove: how to choose power How many kW does your sauna need, built-in or external control, and what must the electrical wiring of the 400 V furnace meet? Čítať článok →
Plasterboard stilts: working at height without scaffolding
2026.11.15 09:00 Plasterboard stilts: working at height without scaffolding What are stilts for drywallers and painters, what height to choose, and how to get started with them safely. Čítať článok →
LiFePO4 battery for photovoltaics: why this chemistry?
2026.11.15 09:00 LiFePO4 battery for photovoltaics: why this chemistry? Safety, durability and low voltage 48 / 51.2 V. What to look for when choosing a LiFePO4 battery for a hybrid inverter. Čítať článok →
How many kWh of battery do you really need?
2026.11.15 09:00 How many kWh of battery do you really need? Simple calculation of battery capacity for photovoltaics: night consumption, panel production, reserve and backup in case of outage. Čítať článok →
Deye Hybrid Inverter: 10, 12, 15 or 20 kW?
2026.11.15 09:00 Deye Hybrid Inverter: 10, 12, 15 or 20 kW? How to select the power of a three-phase low-voltage Deye inverter according to panels, house consumption, backup circuits and battery. Čítať článok →
Digital rotary laser for slopes: when is it worth it?
2026.11.15 09:00 Digital rotary laser for slopes: when is it worth it? Slope in percentages on both the X and Y axes – sewers, drainage, terraces and driveways. Difference between the basic and complete set. Čítať článok →
Demolition hammer: what power and which chisels
2026.11.15 09:00 Demolition hammer: what power and which chisels Lighter or stronger demolition hammer, chisels for concrete and paving, proper technique and safety when demolishing. Čítať článok →
Standing or horizontal faucet: where to place it
2026.11.15 09:00 Standing or horizontal faucet: where to place it The difference between the 16.3 kWh battery designs and placement principles: floor load capacity, temperature, ventilation and proximity to the inverter. Čítať článok →
48V or 51.2V battery – what's the difference?
2026.11.15 09:00 48V or 51.2V battery – what's the difference? 15 or 16 cells, lower current and inverter compatibility. When to choose 48 V and when 51.2 V battery for photovoltaics. Čítať článok →
Smartmeter for photovoltaics: what is it for?
2026.11.15 09:00 Smartmeter for photovoltaics: what is it for? Why does a hybrid inverter need a three-phase smart meter, how does it help with self-consumption and zero flow, and what to look out for during installation. Čítať článok →
Electric grill - hotplate for bistros and terraces
2026.11.14 09:00 Electric grill - hotplate for bistros and terraces What power and size of the plate to choose, what temperature to grill individual dishes at, and how to fire up and maintain the plate. Čítať článok →
Oil heater (boofik): what it is good for and how to connect it safely
2026.11.13 09:00 Oil heater (boofik): what it is good for and how to connect it safely Heat for the workshop, garage or caravan without a heating system. 8 kW heater versions, exhaust installation principles and regular maintenance. Čítať článok →
Core drilling in concrete: performance, stand and safety
2026.11.12 09:00 Core drilling in concrete: performance, stand and safety How a core drill works, why it is drilled wet and from a stand, and what to watch out for when drilling into reinforced concrete. Čítať článok →
RFID access system: standalone keypad or controller?
2026.11.11 09:00 RFID access system: standalone keypad or controller? When is a separate keypad with a card reader enough and when is a ZKTeco C3 controller worth it for multiple doors? What else do you need for a lock? Čítať článok →
CNC milling machine or CO2 laser engraver?
2026.11.10 09:00 CNC milling machine or CO2 laser engraver? One removes material, the other vaporizes it. Comparison of CNC milling machine and CO2 laser – which machine is suitable for which materials and work. Čítať článok →
Ultrasonic cleaner: what goes into it and what liquid to use
2026.11.09 09:00 Ultrasonic cleaner: what goes into it and what liquid to use From jewelry to carburetors. What size cleaner to choose, when heating will help, what liquid to use, and what to never put in an ultrasonic cleaner. Čítať článok →
Cutting plotter: width, blades and what you can make with it
2026.11.08 09:00 Cutting plotter: width, blades and what you can make with it Stickers, car decals, iron-on transfers for textiles. What width of plotter to choose, what to look for when choosing and how to care for knives. Čítať článok →
Sublimation printing for beginners
2026.11.07 09:00 Sublimation printing for beginners What you need for sublimation, how to proceed step by step and why colors sometimes fade. A practical guide to your first t-shirts and mugs. Čítať článok →
How to choose a heat press: flat, mug or multifunctional?
2026.11.06 09:00 How to choose a heat press: flat, mug or multifunctional? A flat press for T-shirts, a cylinder for mugs or a multifunctional 9-in-1? What to look for when choosing a heat press and what consumables to remember. Čítať článok →