Airless sprayers apply paint without air - a piston pushes the paint under high pressure through a small nozzle, where it is atomized. The result is an even coating and work is several times faster than with a roller.
What can be sprayed?
- interior dispersion paints (walls, ceilings),
- facade paints, varnishes and wood stains,
- penetrations, coatings of fences and roofs,
- with a suitable gun and plaster mixtures (special gun for plaster and mortar).
The nozzle makes the difference
The nozzle number (e.g. 517) indicates the fan width and the size of the opening:
- first digit × 2 ≈ fan width in inches at 30 cm from the wall (517 → about 10")
- last two digits = hole size in thousandths of an inch (17 → 0.017").
Thin varnishes and glazes need a smaller opening (e.g. 13-15), thick dispersion paints need a larger one (17-21).
First steps
- Filter the paint and dilute as needed according to the manufacturer's instructions.
- Rinse the machine with water (for water-based paints).
- Start with lower pressure and increase until the fan has sharp edges without streaks.
- Hold the gun vertically, approximately 30 cm from the surface, move evenly and overlap the stripes by about half.
Safety
- Never point a gun at people – the high pressure can pierce the skin.
- When taking a break , lock the trigger and relieve pressure before changing the nozzle.
- Wear a respirator and goggles, cover the surrounding area.
After work
Clean the machine, hose and gun thoroughly - dried paint is the most common cause of malfunctions. We have spare nozzles, hoses and guns in stock.