A cutting plotter doesn't cut paper like scissors - it uses a small rotary knife to precisely cut a shape into the foil, leaving the backing paper intact. This is how signs for cars and shop windows, iron-on transfers for T-shirts, and stencils are created.
Width depending on what you will be doing
- Up to 720 mm – stickers, smaller signs, iron-on transfers for textiles. It also fits on a workbench.
- 870 mm – the golden mean for advertising companies: shop windows, company cars, signs.
- 1350 mm – large stickers and long signs, mostly on a stand.
Foils are sold in standard roll widths, so it's worth choosing a plotter that can fit your favorite roll in its entirety.
What else to watch
- Knife pressure – thicker foils and reflective materials need higher pressure.
- Optical mark scanning (if the plotter has it) – necessary for contour cutting of printed labels.
- Connection and software – USB is standard; check what program you will be working with.
Knives and maintenance
The knife is a consumable item. A dull knife will rip corners and won't cut small letters. Keep spare knives on hand and keep the cutting mat clean - glue residue will reduce accuracy.
Typical procedure
- Prepare the motif as a vector (curves), not as a photo.
- Cut and spit out – remove excess foil around the letters.
- Stick the transfer (application) foil and transfer the motif to the substrate.
When using iron-on transfers on textiles, remember to mirror the motif and then press it with a heat press.