Digital rotary laser for slopes: when is it worth it?

Digital rotary laser for slopes: when is it worth it?

A regular rotating laser will create a horizontal plane. However, when it comes to sewers, drainage, patio drainage or driveways, you need an accurate slope . This is what a digital rotating laser for slopes is for.

What else does he know?

  • The incline is set numerically in percentages – for example, 2% – on the display or controller.
  • The inclination can be adjusted in two axes (X and Y) , so it can also handle surfaces with a slope into a corner.
  • The laser maintains its slope on its own; there is no need to manually tilt and check it.

When is it worth it?

  • sewerage and drainage – pipe slope in percentages directly according to the project,
  • terraces, sidewalks, paving stones – drainage from the house,
  • parking lots and driveways , sports areas,
  • landscaping with a prescribed slope.

If you are mainly doing horizontal planes (foundations, floors), a classic rotating laser will suffice.

Base or set

  • The basics – a laser in a case with a receiver and accessories, a tripod and a staff are already there.
  • Complete set - plus a tripod and 5 m telescopic staff, you can start measuring right away.

How to work

  1. Place the laser on a tripod and let it level.
  2. Rotate the slope axis in the direction of the slope (according to the mark on the laser).
  3. Enter the slope in percent.
  4. Use the receiver on the staff to check the heights - the difference between the two points corresponds to the set slope.

The calculation is simple: a slope of 2% = 2 cm for every meter of length.

← Späť na blog