RFID access system: standalone keypad or controller?

RFID access system: standalone keypad or controller?

Keys get lost and can be copied. An access system with RFID cards or chips and a PIN code is more convenient and a lost card is simply blocked. There are two ways for small and medium-sized objects.

Standalone keyboard

The keypad with a 125 kHz card reader remembers cards and codes on its own and directly switches the electric lock or door opener. Typical use:

  • entrance to the house, garage, workshop or office,
  • one to two doors, dozens to hundreds of users,
  • opening with a card, PIN code or card + PIN combination .

The advantage is simplicity - no computer or software required. The vandal-proof metal design with IP65 protection can withstand outdoor use. Some models also have a doorbell button .

Access controller (for example ZKTeco C3)

The controller is the "brain" to which readers on multiple doors connect. It is managed via network and software:

  • multiple doors (C3-100 = 1 door, C3-200 = 2, C3-400 = 4),
  • time profiles – who can enter and when,
  • history of transitions – who opened the door and when,
  • Readers connect via Wiegand interface; a separate keyboard can also be used as a reader for the controller.

What else will you need?

  • electric lock or electromagnet and power supply (most often 12 V),
  • exit button from the inside,
  • cards or key fobs with a frequency according to the reader (125 kHz).

When planning escape routes, make sure that the doors can be opened even in the event of a power outage. If you are unsure about the wiring, call us – we will advise you on which lock will fit which.

← Späť na blog