An electric sauna heater heats the stones and air in the sauna. If it is weak, the sauna heats up for a long time and does not reach the temperature. If it is unnecessarily strong, it is more expensive and harder to regulate. How to choose the right one?
Power by volume
A commonly used rule of thumb is approximately 1 kW per 1 m³ of well-insulated sauna. Increase the power if the sauna has:
- glass door or window ,
- uninsulated brick or stone walls,
- is outdoors (garden sauna).
An 8 kW stove is therefore suitable for a sauna with a volume of around 7 to 10 m³ – depending on the insulation. You can calculate the volume as length × width × height in meters.
Built-in or external control
- Built-in control – temperature control and timer are directly on the oven. Simple, no additional wiring.
- External control – the control panel is outside the sauna, for example by the door. It is more convenient, you can adjust it without entering the hot cabin, and the controller is not exposed to heat and moisture.
Electrical connection
Furnaces with an output of around 8 kW are connected to a three-phase voltage of 400 V. The connection must be made by a licensed electrician - with a suitable cable cross-section, circuit breaker and residual current device according to the manufacturer's instructions.
Safety and operation
- Maintain minimum distances between the oven and walls, benches and guardrails.
- Place the stones loosely so that air can flow between them.
- Pour water onto the stones little by little and never onto the heating elements themselves.
- Check the stones from time to time and replace any that are broken.