Ultrasonic cleaner: what goes into it and what liquid to use

Ultrasonic cleaner: what goes into it and what liquid to use

An ultrasonic cleaner creates millions of tiny bubbles in a liquid that, when they collapse, release dirt from places you can't reach with a brush. It works on jewelry and carburetors - the only difference is the size of the tub and the liquid.

What size to choose?

  • 2 – 3 l – glasses, jewelry, watches, dentures, small parts.
  • 6 – 10 l – tools, workshop parts, smaller carburetors, printer heads.
  • 15 - 30 l - car parts, larger carburetors, hubs, gearboxes, workshops and services.

The object should be completely submerged and not lying directly on the bottom – use a basket.

What liquid to use

  • Water with a drop of detergent – jewelry, glasses, general dirt.
  • Special concentrates – for grease, oils, carbon; choose products designed for ultrasound.
  • Never flammable substances (gasoline, thinner) – heat and vibration are a bad combination.

Heating and time

Warm liquid cleans faster, which is why larger cleaners have heating . A temperature of around 50-60 °C will help with grease. The time ranges from a few minutes for jewelry to tens of minutes for heavily soiled parts.

What doesn't belong in the cleaner

  • jewelry with glued stones , pearls, opal and soft gemstones,
  • objects with damaged surfaces or paint that may peel off,
  • electronics that are not intended for wet cleaning.

After cleaning, rinse the items with clean water and dry. Change the liquid when it is visibly cloudy – dirty liquid cleans less well.

← Späť na blog